| PRODUCT NAME : | KingTone Multiband Mobile Signal Repeater GSM DCS WCDMA LTE Quad 900 1800 2100 2600mhz Cell Phone Network 2G 3G 4G Amplifier Booster |
| MODEL : | KT- 900/1800/2100/2600 |
| PRODUCT CATEGORY : | Booster |
| POWER SUPPLY : | AC 110V、AC 220V、AC 240 |
| FREQUENCY : | 890-915MHz/935-960MHz、1710-1785MHz/1805-1880MHz、1920-1980MHz/2110~2170MHz、2500-2570MHz/2620-2690MHz |
| SCENARIOS : | Office、Supermarket |
| COVERAGE : | 500sqm |
Why need Quad-band Mobile Signal Booster for Cell Phones?
This booster is suitable for GSM 900mhz DCS1800mhz WCDMA2100mhz LTE2600MHZ frequency band.
It can boost 2G 3G voice 4G data.
Perfect for 1 - 2 room or small offices: Say goodbye to dropped calls in your home.
2.Frequency Range:
Band8 -B8 (GSM900): UL:890~915mhz;DL:935~960mhz;
Band3 -B3 (DCS1800): UL:1710~1785mhz;DL:1805~1880mhz;
Band1 -B1 (WCDMA 2100): UL:1920~1980mhz;DL:2110~2170mhz;
Band7 -B7 (LTE2600): UL:2500~2570mhz;DL:2620~2690mhz;
3.With LCD Display , can indicate the signal status.
4.Coverage area: cover about 300-500sqm without barrier.1 antenna cover about 100-150sqm.
5.High linear design, ALC technology.
6.1 set should with 2G 3G 4G outdoor antenna,2G 3G 4G indoor antenna, signal repeater. Ideal for home used. (Customized antennas & cable length, more details,please contact with Anna: WhatsApp +86 15392188577)
7.Improve Indoor mobile signal,no more dropping calls,no more bad network speed.
Find Complete Details about 900 1800 2100 2600 2g 3g 4g Lte Quad Band Cell Repeater,Quad Band Cell Repeater,2g 3g 4g Lte Quad Band CellRepeater,2g 3g 4g Lte Quad Band Cell Repeater from Repeater Supplier or Manufacturer-QuanzhouKingtone Optics & Electronics Technology Co., Ltd.
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
3. Cover about 200~3000m² without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
7. Support system GSM 900, DCS 1800,WCDMA2100, 4G 2600
8. Expansion and extention of the signal of base station.
Optimization of the quality of the signal and source
Specification
Electrical specification | Uplink | Downlink | ||
Quad Band Frequency Range | Band 8 GSM 900mhz | 890-915MHz | 935-960MHz | |
Band 3 DCS 1800mhz | 1710-1785MHz | 1805-1880 MHz | ||
Band 1 3G 2100mhz | 1920-1980MHz | 2110-2170 MHz | ||
Band 7 LTE 4G 2600Mhz | 2500-2570MHz | 2620-2690MHz | ||
Max .Gain | ≥ 60dB | ≥ 65dB | ||
Max .Output Power | ≥ 10dBm | ≥ 18dBm | ||
MGC ( Step Attenuation ) | ≥ 31dB / 1dB step | |||
Automatic Level Control | ≥ 20dB | |||
Gain Flatness | GSM & DCS | Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P) | ||
WCDMA | ≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P) | |||
Noise Figure | ≤ 5dB | |||
VSWR | ≤ 2.0 | |||
Group Delay | ≤ 1.5μs | |||
Frequency stability | ≤ 0.01ppm | |||
Spurious Emission & | GSM Meet ETSI TS 151 026 V 6.1.0 | |||
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||||
CDMA Meet IS95 & CDMA2000 | ||||
WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||
Modulation Accuracy | ≤ 12.5% | |||
Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | |||
Mechanical Specifications | Standard | |||
I /O Port | N-Female | |||
Impedance | 50 ohm | |||
Operating Temperature | -25ºC~+55ºC | |||
Environment Conditions | IP40 | |||
Dimensions | 230mm*170mm*20mm | |||
Weight | ≤ 3.00Kg | |||
Power Supply | 5V 2A | |||
LED Alarm | Standard | |||
Power LED | Power Indicator | |||
900/1800/2100/2600 | Its will be lighted when outdoor signal coming to repeater unit | |||