Items

Testing Condition

Specification

MEMO

Uplink

Downlink

Working Frequency(MHz)

Band3

Nominal Band

1710-1785MHz

1805-1880 MHz

Band3

1920-1980 MHz

2110-2170 MHz

Bandwidth

Band3

Nominal Band

75MHz

Band3

Nominal Band

60MHz

Max Gain(dB)

Nominal Output Power-5dB

35±3

Out of Band

Gain (DL/UL)

± 400 KHz offset

and greater

Nominal Band

≤ 50 dB

± 600 KHz offset

and greater

Nominal Band

≤ 40 dB

± 1 MHz offset

and greater

Nominal Band

≤ 35 dB

± 5 MHz offset

and greater

Nominal Band

≤ 25 dB

Technology Included

Nominal Band

2G(GSM),3G(WCDMA),4G(LTE)

Output Power

(dBm)

Band3

modulating signal

0±2

+43±2

Band3

modulating signal

0±2

+43±2

Band41

modulating signal

0±2

+43±2

ALC (dBm)

Input Signal add 20dB

△Po≤±1

AGC (Automatic Gain Control)

Input Signal add 20dB

≥ 25 dB/1 dB step

Noise Figure (dB)

Working in-band（Max. Gain）

≤6

Ripple in-band (dB)

Nominal Output Power -5dB

≤3

Frequency Tolerance (ppm)

Nominal Output Power

≤0.05

Time Delay (us)

Working in-band

≤5

Peak Phase Error(°)

Working in-band

≤20

For GSM

RMS Phase Error (°)

Working in-band

≤5

For GSM

EVM (Error vector margin)

Working in-band

≤ 12.5%

For LTE

ACLR

LTE

Working in-band

Compatible with 3GPP TS 36.143

UMTS

Working in-band

Compatible with 3GPP TS 25.143

Spectrum Mask

LTE

Working in-band

Compatible with 3GPP TS 36.143

UMTS

Working in-band

Compatible with 3GPP TS 25.143

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

IMD3 (dBc)

Working in-band

≤-45

For GSM

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Storage Temperature

-25°C ~+75°C

Relative Humidity

5% ~ 95%

Grounding kit

YES

Degrees of protection

≥ IP40

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Power Consumption

≤ 350 W @Total

Software Function

Repeater restart function

YES

GUI base

RJ45/RS232 cable

Firmware download

YES

Status monitoring

(Alarm & signal level)

Real-time alarm for Door Status, Temperature, Power Supply, VSWR,

Output Power (UL/DL)

Battery/Pin

YES

Battery Back Up

>2Hours

Remote Monitoring System

SMS and data 2G / 3G / 4G (SMS and data monitoring by 2G / 3G / 4G)

Included with repeater

(Repeater can receive and send the correct alarm status to the server as soon as the warning appears.

Required warnings:

Repeater operation status (ON / OFF).

Equipment fault warning (PLL, PA ..).

AC power failure warning.

Failed: The repeater could not receive the correct status warnings and warnings to the server when warning appeared.

No warnings required:

Repeater operation status (ON / OFF).

Equipment fault warning (PLL, PA ..).

AC power failure warning.)

Option

Others

Supply full document of this product

YES

Support to handle difficult cases

YES

Training on the installation and

operation

YES

Provided full of user manuals for handle the failed

YES