Tri band repeater is to support any three mobile band existing in the world to help end users to improve mobile signals for much better phone call quality and smoother data transmission. It is designed to support coverage area max can up to 2000 square meters with proper engineering.
1. With unique appearance design, have good cooling function
2. With LCD display , we can know the unit gain and output power clearly
3. With DL signal LED display, help to install the outdoor antenna at the best state;
4.With AGC and ALC, make repeater work stable .
5.PCB with isolation function ,make UL and DL signal not influence each other,
6.Low intermodulation, high Gain ,stable Output power
Electrical specification
Uplink
Downlink
Frequency Range
B5 / 850MHz
824 ~ 849 MHz
869 ~ 894 MHz
B2 / 1900MHz
1850-1910 MHz
1930-1990MHz
B4 / AWS 1700/2100MHz
1710 ~ 1755 MHz
2110 ~ 2155 MHz
Max .Gain
≥ 75dB
≥ 78dB
Max .Output Power
≥ 30dBm
≥ 33dBm
MGC ( Step Attenuation )
≥31dB / 1dB step
Automatic Level Control
≥ 20dB
Gain Flatness
GSM & CDMA
Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P)
WCDMA
≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P)
Noise Figure
≤ 5dB
VSWR
≤ 2.0
Group Delay
≤ 1.5μs
Frequency stability
≤ 0.01ppm
Spurious Emission &
Output inter-modulation
GSM Meet ETSI TS 151 026 V 6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet IS95 & CDMA2000
WCDMA System
Spurious Emission Mask
Meet 3GPP TS 25.143 ( V 6.2.0 )
Modulation Accuracy
≤ 12.5%
Peak Code Domain Error
≤ -35dB@Spreading Factor 256
CDMA System
Rho
ρ > 0.980
ACPR
Meet IS95 & CDMA2000
Mechanical Specifications
Standard
I /O Port
N-Female
Impedance
50 ohm
Operating Temperature
-25ºC~+55ºC
Environment Conditions
IP40
Dimensions
650*250*53mm
Weight
≤ 6.50Kg
Power Supply
Input AC100~240V,output DC9V / 3A
LED Alarm
Standard
Power LED
Power Indicator
UL LED
Be lighted when there is phone calling
DL 1
Be lighted when Outdoor signal is -65dB
DL 2
Be lighted when Outdoor signal only -55dB
DL 3
Be lighted when Outdoor signal only -50dB
