A cell phone signal booster (also known as cellular repeater or amplifier) is a device that boosts cell phone signals to and from your mobile phone whether at home or office or in any vehicle.
It does this by taking the existing cellular signal, amplifying it, and then broadcasting to an area in need of better reception.
A booster kit includes an booster, an indoor antenna and an outdoor antenna, the outdoor antenna can pick up good mobile signal from outside of your house, and send the signal through coaxial cable to the booster, the booster can amplify the signal, then the amplified signal is sent to the indoor antenna, the indoor antenna can transmit the signal into your house, so you can enjoy clearer phone call or faster mobile date inside your house.
The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.
Preparing to Buy a Booster:
1. Check your frequency, because different Phone Providers operate on different frequencies and the booster can only work on correct frequency.For more detail, refer to www.unlockonline.com/mobilenetworks.php
2. Make sure that you can place calls on the outside of your home, in the attic, at roof level or wherever you plan to place the Outdoor Antenna. Phonetone can only bring signal into your home when signal reaches the Outdoor Antenna. If there is no signal, the Phonetone will not work for you.
Main Features:
1. With unique appearance design, have good cooling function
2. With MGC function,(Manual Gain Control), Customer can adjust the Gain as needed ;
3. With DL signal LED display, help to install the outdoor antenna at the best state;
4.With AGC and ALC, make repeater work stable .
5.PCB with isolation function ,make UL and DL signal not influence each other,
6.Low intermodulation, high Gain ,stable Output power
Electrical specification | Uplink | Downlink |
Frequency Range | 4G LTE | 2500~ 2570 MHz | 2620 ~ 2690MHz |
Max .Gain | ≥ 70dB | ≥ 75dB |
Max .Output Power | ≥ 24dBm | ≥ 27dBm |
MGC ( Step Attenuation ) | ≥ 31dB / 1dB step |
Automatic Level Control | ≥ 20dB |
Gain Flatness | GSM & CDMA | Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P) |
WCDMA | ≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P) |
Noise Figure | ≤ 5dB |
VSWR | ≤ 2.0 |
Group Delay | ≤ 1.5μs |
Frequency stability | ≤ 0.01ppm |
Spurious Emission &
Output inter-modulation | GSM Meet ETSI TS 151 026 V 6.1.0 |
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) |
CDMA Meet IS95 & CDMA2000 |
WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) |
Modulation Accuracy | ≤ 12.5% |
Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 |
CDMA System | Rho | ρ > 0.980 |
ACPR | Meet IS95 & CDMA2000 |
Mechanical Specifications | Standard |
I /O Port | N-Female |
Impedance | 50 ohm |
Operating Temperature | -25ºC~+55ºC |
Environment Conditions | IP40 |
Dimensions | 155x112x85mm |
Weight | ≤ 1.50Kg |
Power Supply | Input AC90-264V,output DC 5V / 3A |
LED Alarm | Standard |
Power LED | Power Indicator |
UL LED | Be lighted when there is phone calling |
DL 1 | Be lighted when Outdoor signal is -65dB |
DL 2 | Be lighted when Outdoor signal only -55dB |
DL 3 | Be lighted when Outdoor signal only -50dB |
2Package Included:
1 * lte repeater band4 network booster 4g mobile signal booster 2600
1 * Power Adapter
1 * Mounting Screw Kit
1 * English User Manual
Note : The product is not including cable,outdoor antenna,indoor antenna,you need to buy extra
