JIMTOM® GSM900 Pico Repeater provides the most cost-effective solution to improve user experience of high quality GSM access in indoor environment. Equipping innovative plug-and-play enabling technologies, general users are able to easily install by themselves without any professional skill.
 17-24dbm gsm 900mhz telecom mobile signal indoor booster

What will be changed when using this products?
 1 A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band;
 2 No more dropped calls! No more poor reception;
 3 No more running to the windows or going outside to talk on your mobile phone;
 4 Now you can reach everywhere with signal boosters;

 How can repeater bring your mobile phone better signal?
•The outside antenna catches low signal from operator servicer’s base station and delivers it to cell phone rep   eater through the connection cable (coax).
•After the signal is accepted by the mobile repeater, this device amplifies it.
•Then this amplified signal goes through the connection cable (coax) to the inside antenna.
•And after that, the amplified signal transmits to your cell phone.
• Finally, your cell phone will get good signal, never on and ofF
 

Items		Uplink	Downlink
Frequency Range		890~915 MHz	935~960 MHz
Output Power		15±2 dBm	20±2 dBm
Gain		65±2 dB	70±3 dB
Ripple		≤8 dB	≤8 dB
VSWR@ min. gain		≤2.5	≤2.5
Max. Input Power Without Damage		-10 dBm	-10 dBm
ATT step of 1dB	1 ~ 10dB	∣△∣≤1 dB	∣△∣≤1 dB
	10 ~ 20dB	∣△∣≤1 dB	∣△∣≤1 dB
	20 ~ 25dB	∣△∣≤1.5 dB	∣△∣≤1.5 dB
ALC Active 10dB		∣△∣≤2 dB	∣△∣≤2 dB
Out of Band Gain	± 1.5 MHz	≤ 45 dB	≤ 50 dB
	± 5 MHz	≤ 30 dB	≤ 35 dB
Intermodulation Products (CW)		≤ -36 dBm	≤ -45 dBc
Spurious Emission	9KHz~1GHz	≤ -36 dBm	≤ -36 dBm
	1GHz~12.75GHz	≤ -30 dBm	≤ -30 dBm
Noise Figure @ max. gain		≤ 7 dB	≤ 7 dB
Time Delay		≤ 5 μs	≤ 5 μs
Alarm	ALC not Active	—	Green
	ALC Active 5-10dB	—	Orange
	ALC Active 15-20dB	—	Red
Power Supply		AC220V ±20%, 50Hz ±10%
Power Comsumption		≤15 W
Dimensions		155mmx268mmx60mm
Weight		2kg
RF Connector		N-Female
Environment Conditions		IP40
Humidity		< 90%
Operating Temperature		-10℃~+55℃