10W LTE 2600Mhz 4g mobile signal repeater broadband repeater 40dBm 90db gain -4G LTE 2600mhz repeater

10W LTE 2600Mhz 4g mobile signal repeater broadband repeater 40dBm 90db gain

PRODUCT NAME :	10W LTE 2600Mhz 4g mobile signal repeater broadband repeater 40dBm 90db gain
MODEL :	KT-LRP-B70-P40-VII
PRODUCT CATEGORY :	4G LTE 2600mhz repeater
POWER SUPPLY :	AC 110V、AC 220V、DC -48V、DC-24V
FREQUENCY :	890-915MHz/935-960MHz、1710-1785MHz/1805-1880MHz、1850-1910MHz/1930-1990MHz、1920-1980MHz/2110~2170MHz、806 – 821MHz/851 - 866MHz
SCENARIOS :	Stadium、Office、Railway、Scenic、Pier、Island、Offshore、Urban road、Supermarket 、Metro、Rural、Suburban、Hospital、Campus、Mine、Oilfield、Tunnel
COVERAGE :	5000sqm、1-3km、3-5km、1-5KM

Introduction
Mainfeature
Application&scenarios
Specification
Parts/Warranty

LTE Band VII 10W Band Selective Repeaters（KT-LRP-B70-P40-VII）

Kingtone Repeater

Kintong 4g repeater system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Cellular repeater
This is a radio repeater for boosting cell phone reception in a limited area. The device functions like a small cellular base station, with a directional antenna to receive the signal from the nearest cell tower, an amplifier, and a local antenna to rebroadcast the signal to nearby cell phones. It is often used in downtown office buildings.

Main Features of kingtone 4G lte cellular repeater
◇ High linearity PA; High system gain；
◇ Intelligent ALC technology；
◇ Full duplex and high isolation from uplink to downlink；
◇ Automatic Operation convenient operation；
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;

TTechnical Specifications

Items		Testing Condition	Specification			MEMO
			Uplink		Downlink
Working Frequency(MHz)		Nominal Frequency	2500 – 2570 MHz		2620 – 2690 MHz	LTE/customized frequency
Gain(dB)		Nominal Output Power-5dB	95±3
Output Power (dBm)		GSM modulating signal	37		40
ALC (dBm)		Input Signal add 20dB	△Po≤±1
Noise Figure (dB)		Working in-band（Max. Gain）	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
ACLR		Working in-band	Compatible with 3GPP TS 36.143 and 3GPP TS 36.106			For LTE, PAR=8
Spectrum Mask		Working in-band	Compatible with 3GPP TS 36.143 and 3GPP TS 36.106			For LTE, PAR=8
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36

	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm
Operating Temperature		-25°C ~+55°C
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

12 month warranty for repeater equipment ,
6months for accessories of repeater


E-mail:
Products:	UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification: