USER
27DBM IDEN 800 Cellular mobile phone repeater BDA Repeater
PRODUCT NAME : 27DBM IDEN 800 Cellular mobile phone repeater BDA Repeater
MODEL : KT-IRP-B15-P27-B
PRODUCT CATEGORY : Single Band Booster
POWER SUPPLY : AC 110VAC 220VDC -48VDC-24V
FREQUENCY : 806 – 821MHz/851 - 866MHz
SCENARIOS : StadiumOfficeHighwayRailwayScenicPierIslandOffshoreUrban roadSupermarket MetroRuralSuburbanHospitalCampusMineOilfieldTunnel
COVERAGE : 5000sqm
  • Introduction
  • Mainfeature
  • Application&scenarios
  • Specification
  • Parts/Warranty
IDEN800 +27dBm Band Selective Repeaters(KT-IRP-B15-P27-B)
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

IDEN 800 Indoor Cellular repeater Main Features     
◇ High linearity PA; High system gain;
◇ Intelligent ALC technology;
◇ Full duplex and high isolation from uplink to downlink;
◇ Automatic Operation convenient operation;
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;

Technical Specifications  

Items

Testing Condition

Specification

Meno

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

806– 821MHz

851 - 866MHz

 

Bandwidth

Nominal Band

15MHz

 

Gain(dB)

Nominal Output Power-5dB

80±3

 

Output Power (dBm)

GSM modulating signal

24

27

 

ALC (dBm)

Input Signal add 20dB

△Po≤±1

 

Noise Figure (dB)

Working in-bandMax. Gain

≤5

 

Ripple in-band (dB)

Nominal Output Power -5dB

≤3

 

Frequency Tolerance (ppm)

Nominal Output Power

≤0.05

 

Time Delay (us)

Working in-band

≤5

 

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

 

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

 

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

 

20dB

Nominal Output Power -5dB

±1.0

 

30dB

Nominal Output Power -5dB

±1.5

 

Out of Band Gain

±400KHz

Nominal Output Power -5dB

50

 

±600KHz

Nominal Output Power -5dB

40

 

±1MHz

Nominal Output Power -5dB

35

 

±5MHz

Nominal Output Power -5dB

25

 

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

 

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

 

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

 

VSWR

BS/MS Port

1.5

 

I/O Port

N-Female

 

Impedance

50ohm

 

Operating Temperature

-25°C ~+55°C

 

Relative Humidity

Max. 95%

 

MTBF

Min. 100000 hours

 

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

 

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

 

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

 

 

12 month warranty for repeater equipment ,
6months for accessories of repeater
■ contat supplier
E-mail:
Products: UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier
BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification: