30dBm IDEN800 Band Selective Repeater -IDEN 800mhz Repeater

30dBm IDEN800 Band Selective Repeater

PRODUCT NAME :	30dBm IDEN800 Band Selective Repeater
MODEL :	KT-IRP-B15-P30-B
PRODUCT CATEGORY :	IDEN 800mhz Repeater
POWER SUPPLY :	AC 110V、AC 220V、DC -48V
FREQUENCY :	806 – 821MHz/851 - 866MHz
SCENARIOS :	Stadium、Office、Highway、Railway、Scenic、Pier、Island、Offshore、Urban road、Supermarket 、Metro、Rural、Suburban、Hospital、Campus、Mine、Oilfield、Tunnel
COVERAGE :	5000sqm、1-3km、1-5KM、5000-50000sqm

Introduction
Mainfeature
Application&scenarios
Specification
Parts/Warranty

30dBm IDEN800 Band Selective Repeater

Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Main Features

◇ High linearity PA; High system gain

◇ Intelligent ALC technology

◇ Full duplex and high isolation

◇ Sharp filter curve ◇ Automatic Operation convenient operation

◇ Modular design ease to maintain

◇ Remote control/monitor/alarm via RF MODEM or Ethernet

◇ IP65 chassis design for both indoor and outdoor application

Technical Specifications

Items		Testing Condition	Specification		Meno
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	806– 821MHz	851 - 866MHz
Bandwidth		Nominal Band	15MHz
Gain(dB)		Nominal Output Power-5dB	95±3
Output Power (dBm)		GSM modulating signal	27	30
ALC (dBm)		Input Signal add 20dB	△Po≤±1
Noise Figure (dB)		Working in-band（Max. Gain）	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Out of Band Gain	±400KHz	Nominal Output Power -5dB	65
	±600KHz	Nominal Output Power -5dB	55
	±1MHz	Nominal Output Power -5dB	45
	±5MHz	Nominal Output Power -5dB	35
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm
Operating Temperature		-25°C ~+55°C
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

1 year warranty for equipment 6months for accessories


E-mail:
Products:	UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification: