10W GSM900MHz Air Coupling Frequency Shifting wireless Repeater -GSM 900MHz Repeater

10W GSM900MHz Air Coupling Frequency Shifting wireless Repeater

PRODUCT NAME :	10W GSM900MHz Air Coupling Frequency Shifting wireless Repeater
MODEL :	KT-RS900/1800-B25/25-P40B
PRODUCT CATEGORY :	GSM 900MHz Repeater
POWER SUPPLY :	AC 110V、AC 220V、DC -48V
FREQUENCY :	890-915MHz/935-960MHz、1710-1785MHz/1805-1880MHz
SCENARIOS :	Stadium、Office、Highway、Railway、Scenic、Pier、Offshore、Urban road、Supermarket 、Metro、Rural、Suburban、Hospital、Campus、Mine、Oilfield、Tunnel
COVERAGE :	1-3km、5-10km、>10km、5000-50000sqm

Introduction
Mainfeature
Application&scenarios
Specification
Parts/Warranty

10W GSM900MHz Air Coupling Frequency Shifting Repeater is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS).

As per the method of receiving BTS signal by the Donor Unit, two types of FSR are available:
1. Cable-Access FSR: To receive BTS signal via a direct coupler closed to the BTS (Recommended);
2. Wireless-Access FSR: The receive BTS signal via a Donor Antenna (applicable when no line of sight can be viewed between the Donor Unit and Remote Unit as the Donor Unit is installed on the BTS tower).

And both types of FSR can be sorted into 2 sub-categories as per the availability of link frequency:
1. In-band FSR: The link frequency is within the working band of BTS;
2. Out-of-Band FSR: The link frequency is out of the working band of BTS.

Main Features
1. High isolation full duplex design, easy to install.
2. Low noise figure, high receive sensitivity.
3. With ALC and MLC function to ensure stable output power.
4. Low power consumption, environmental protection and energy saving.
5. Modular structure design, easily to upgrade the system.
6. High Q cavity filter and SAW surface acoustic wave filter, high out of band rejection.
7. Adopt the world's most advanced high linearity, low intermodulation LDMOS power amplifier.
8. Adopt the advanced digital PLL, TCXO, OCXO technology, frequency stability and high accuracy.
9. Perfect remote and local network monitoring function.
10. Waterproof design work for all weather indoor and outdoor.

Donor Unit Specification：

Items		Testing Condition	Specification
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	890-915MHz	935-960MHz
Frequency Range(MHz)		Nominal Frequency	1.5G or 1.8G
Gain(dB)		Nominal Output Power-5dB	50±3（Station Couple）
			＞80（Air Receive）
Output Power (dBm)		GSM modulating signal	0（Station Couple）	37
			33（Air Receive）	37
ALC (dBm)		Input Signal add 20dB	△Po≤±1
Noise Figure (dB)		Working in-band（Max. Gain）	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
Peak Phase Error(°)		Working in-band	≤20
RMS Phase Error (°)		Working in-band	≤5
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm
Operating Temperature		-25°C ~+55°C
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Remote Unit Specification：

Items		Testing Condition	Specification
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	890-915MHz	935-960MHz
Frequency Range(MHz)		Nominal Frequency	1.5G or 1.8G
Gain(dB)		Nominal Output Power-5dB	95±3
Output Power (dBm)		GSM modulating signal	37	40
ALC (dBm)		Input Signal add 20dB	△Po≤±1
Noise Figure (dB)		Working in-band（Max. Gain）	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
Peak Phase Error(°)		Working in-band	≤20
RMS Phase Error (°)		Working in-band	≤5
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm
Operating Temperature		-25°C ~+55°C
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

12months for repeater

6months for accessories


E-mail:
Products:	UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification: