Home > Products  > 3G UMTS/WCDMA Repeater
10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier
Product Name : 10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier
Model : KT-3G/B60-P10
Product Category : 3G UMTS/WCDMA Repeater
Power supply : AC 110VAC 220VDC-24V
Frequency : 1920-1980MHz/2110~2170MHz
Scenarios : StadiumOfficeHighwayRailwayScenicPierRuralSuburbanHospitalCampusMineOilfieldTunnel
Coverage : 1-3km3-5km5-10km>10km1-5KM
     
skype : WCDMA 2100MHz Fiber Optic Repeater
E-mail : 
Price : 
Introduction
10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier consist of Master and Slave. One Master can work together with 1 to 4 Slaves. The Master transfers the BTS signal into optical signal and transmits the optical signal to the Slaves. The Slaves transfer the optical signal into RF signal, amplify the RF signal and cover the target areas. The application of GSM Fiber Optical repeaters will effectively eliminate the signal blind areas, enhance the network quality, improve the image of cellular operators and bring them more profit.
 
As per the method of receiving BTS signal by the Donor Unit, two types of FOR are available:
Cable-Access FOR: to receive BTS signal via a direct coupler closed to the BTS (recommended)
Wireless-Access FOR: to receive BTS signal via a Donor Antenna (applicable when no fiber optic cable connecting to the BTS); can be sorted into 2 sub-categories: Band-Selective and Channel-Selective
 
 
 
Main features
Features:
1,No more self-oscillation and easy to choose installation location
2,For Cable-Access type, pure BTS signal picked up by the Donor Unit will greatly reduce the signal noise
3,The Remote Unit can be installed out of the BTS coverage
4,A full 360-degree coverage can be achieved
5,No need to occupy frequency resource as the link frequency
Application Scenarios
Kingtone Outdoor/Indoor 3G WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier are mainly used in indoor area and outdoor areas already with optic fibers. They are widely used in the places below.
Railway Tube Scenery spot
Campus Hospital Oil field
Road Sea-route Town
Rural area Airport Venue
Electrical Specifications
Specification

Specification:

Type

KT- Outdoor/Indoor 3G WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier

Frequency

UL:1920~1980MHz DL:2110~2170MHz

Output Power

33dBm

37dBm

40dBm

43dBm

Gain

50-65dB

Gain Adjust Range

≥30dB;1dB/step

AGC Range

≥25dB

IMD3

≤-50dBc

≤-45dBc

Noise Figure

≤5dB

Ripple in Band

≤3dB

Time Delay

≤10μs

Spectrum mask

Meet ETSI specification

Spurious Emission

9KHz-1GHz:≤-36dBm/30KHz;1GHz-12.75GHz:≤-30dBm/30KHz

Port Impedance

50Ω

VSWR

≤1.5

Monitoring Mode

Local;Remote(Optional)

Power Supply

AC220V(Normal); AC110V or DC48V or Solar Powered(Optional)

Weight

21kgs

21kgs

26kgs

32kgs

Software

Standard

Local Monitoring

PC via USB Port

Remote Monitoring

Via SMS or GPRS Modem

Controlled Parameters

Gain, Frequency, Repeater ON/OFF, Alarm Enable, etc.

Monitoring Parameters

Gain, Frequency, Repeater ON/OFF, Alarm Message.

Alarm Items

Repeater Failure, DC Failure, ALC Alarm, PLL Failure

Parts/warranty
Contat Supplier
E-mail:  *
Produts:
10W High Output Power Outdoor/Indoor 3G UMTS/HSDPA WCDMA Fiber Optical Repeater 2100MHz Signal Amplifier
Subject:  *
Message:  
Quantity Needed:  
Verification:   *
        
Follow Us:    
search
Online consultation:
contact us
Tel:+86-595-28857991
Address:3th Floor,Bld B,Yucheng Base Keji Road,
Fengze High-Tech Garden,Quanzhou,Fujian,China
Tel:+86-595-28857991
Address:Bld B,Yucheng Base, Keji Road,
Fengze High-Tech Park,Quanzhou,Fujian,China
about us
  · About Us
  · Our Team
product
  ·Repeater
  ·Booster
  ·Antenna
product
  ·FAQ
About Us | Products & Service | Solution & Application | Support | Contact Us
Copyright © Quanzhou Kingtone Optic & Electronic Technology Co.,Ltd.