HOME > PRODUCTS >3G UMTS/WCDMA Repeater

20Watt 43dbm umts 3g 2100MHz cell phone signal booster Repeaters

Stadium /Office /Highway/ Railway /Scenic/ Pier /Island/ Offshore / Urban/ road /Supermarket /Metro/ Rural /Suburban/ Hospital/ Campus /Mine /Oilfield /Tunnel
• mode:KT-WRP-B60-P43-B
• Product Category:3G UMTS/WCDMA Repeater
• Power supply:AC 110VAC 220VDC -48V
• Frequency:1920-1980MHz/2110~2170MHz
  • Products Details
  • Company Profile
  • Introduction
  • Mainfeature
  • Application&scenarios
  • Specification
  • Parts/Warranty

Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Mainfeature

umts 3g 2100 repeater Features:
1,High linearity PA; High system gain;
2,Intelligent ALC technology;
3,Full duplex and high isolation from uplink to downlink;
4,Automatic Operation convenient operation;
5,Integrated technique with reliable performance;
6,Local and remote monitoring (optional) with automatic fault alarm &remote control;
7,Weatherproof design for all-weather installation;

Application&scenarios

3G UMTS WCDMA REPEATER Applications
    To expand signal coverage of fill signal blind area where signal is weak  
or unavailable.
   Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
   Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
    The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;
    And can meet the requirement of antenna isolation to avoid self‐oscillation.

 

 
 

Specification

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

1920 – 1980MHz

2110 - 2170MHz

Gain(dB)

Nominal Output Power-5dB

95±3

Output Power (dBm)

GSM modulating signal

37

43

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-bandMax. Gain

≤5

Ripple in-band (dB)

Nominal Output Power -5dB

≤2.0 (3.84MHz)

Time Delay (us)

Working in-band

≤5

EVM(%)

Working in-band

≤12.5

PCDE (dB)

Working in-band

≤35

ACLR(dBc)

±5MHz

Working in-band

≥-45

±10MHz

Working in-band

≥-50

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Parts/Warranty
12months for repeater ,.6months for accessories
■ Contact Us
E-mail:
Products: UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier
BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification:    
■ Solution&Application
  • *Model : KT-G/DRP-B25/75-P40-B
    *Product Category : 40dbm GSM900/DCS1800 10W Band Selective Repeater gsm long distance repeater

  • *Model : MU:KT-RS850/1800-B25/25-P37A-J-48V-V1.0
    *Product Category : 20W CDMA800MHz BTS Repetidor Air Coupling Frequency Shifting Repeater

  • *Model : KT-850/1900/1700/2100
    *Product Category : 33dBm Tri band signal repeaters 850mhz/1900mhz/1700mhz/2100MHz 2G 3G 4G AWS cell phone signal booster

  • *Model : KTWTF-11180-2.6V
    *Product Category : 11dBi half the vertical polarization slot antenna

Kingtone was established in 2006, located in Microwave Communication Base of the National Torch Plan in Quanzhou, China. It is a leading manufactor specializing in microwave communication equipment field and dedicated to R&D,manufacture,salses and services of microwave passive and active components, softwares of radio stations, communication monitoring and internetwork products.

Kingtone heavy invest to R&D, innovation, quality control system to win good products and good brand reputation. We have achieved seven software copyright certificates registered by the State Copyright Bureau and passed the ISO9001:2008 quality management system. Four Brands have been registered by the State Trademark Bureau and we have been recognized as "innovative and high technology enterprises " by Fujian Science and Technology Department in 2010. Our products are widely used in mobile communication, radio and television, public security, fire control, railways, electric power, mining and other fields; the main products are GSM repeater, CDMA repeater, CDMA450 repeater, IDEN repeater, TETRA repeater ,DCS repeater, PCS repeater, PHS repeater, TD-SCDMA repeater, WCDMA repeater, FDD-LTE repeater,TDD-LTE repeater,WiMAX repeater, MMDS repeater,MUDS repeater, digital TV repeater, VHF/UHF repeater for DMR/dPMR/TETRA/PDT system.

Kingtone insists on the spirit of “people-oriented, technology first, unity and strive, innovation and dedication” and the quality concept of “golden quality win the world” to continuously provide superior quality products and services to our customers.

We are sincerely willing to cooperate with you. let’s win the future together!