HOME > PRODUCTS >Tetra 400Mhz Repeater

43dbm 20W TETRA 400 RF band selective mobile signal repeater

Stadium /Office /Highway/ Railway /Scenic/ Pier /Island/ Offshore / Urban/ road /Supermarket /Metro/ Rural /Suburban/ Hospital/ Campus /Mine /Oilfield /Tunnel
• mode:KT-CRP-B5-P43-B
• Product Category:Tetra 400Mhz Repeater
• Power supply:AC 110VAC 220VDC -48V
• Frequency:885-909MHz/930-960MHz806 – 821MHz/851 - 866MHz
  • Products Details
  • Company Profile
  • Introduction
  • Mainfeature
  • Application&scenarios
  • Specification
  • Parts/Warranty

400M 20W Band Selective Repeaters(KT-CRP-B5-P43-B)
     Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low‐power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Mainfeature

Main Features of kingtone cellular repeater     
◇ High linearity PA; High system gain;
◇ Intelligent ALC technology;
◇ Full duplex and high isolation from uplink to downlink;
◇ Automatic Operation convenient operation;
◇ Integrated technique with reliable performance;
◇ Bandwidth can be configured from 5-25MHz in work band.
◇ Local and remote monitoring (optional) with automatic fault alarm &remote control;
◇ Weatherproof design for all-weather installation;

Application&scenarios

TETRA Repeater Applications
    To expand signal coverage of fill signal blind area where signal is weak  
or unavailable.
   Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
   Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
    The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than ‐70dBm;
    And can meet the requirement of antenna isolation to avoid self‐oscillation.

 
 

Specification

Items

Testing Condition

Specification

Uplink

Downlink

Working Frequency(MHz)

Nominal Frequency

410 – 415MHz

420 - 425MHz

Gain(dB)

Nominal Output Power-5dB

80±3

Output Power (dBm)

 

37

43

ALC (dBm)

Input Signal add 20dB

Po≤±1

Noise Figure (dB)

Working in-bandMax. Gain

≤6

Ripple in-band (dB)

Nominal Output Power -5dB

≤4.0

Time Delay (us)

Working in-band

≤5

Gain Adjustment Step (dB)

Nominal Output Power -5dB

1dB

Gain Adjustment Range(dB)

Nominal Output Power -5dB

≥30

Gain Adjustable Linear(dB)

10dB

Nominal Output Power -5dB

±1.0

20dB

Nominal Output Power -5dB

±1.0

30dB

Nominal Output Power -5dB

±1.5

Out of Band Gain

±400KHz

Nominal Output Power -5dB

≤50

±600KHz

Nominal Output Power -5dB

≤40

±1MHz

Nominal Output Power -5dB

≤35

±5MHz

Nominal Output Power -5dB

≤25

Inter-modulation Attenuation (dBc)

Working in-band

≤-45

Spurious Emission(dBm)

9kHz-1GHz

BW:30KHz

≤-36

≤-36

1GHz-12.75GHz

BW:30KHz

≤-30

≤-30

VSWR

BS/MS Port

1.5

I/O Port

N-Female

Impedance

50ohm

Operating Temperature

-25°C ~+55°C

Relative Humidity

Max. 95%

MTBF

Min. 100000 hours

Power Supply

DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)

Remote Monitoring Function

Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power

Remote Control Module

RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Parts/Warranty
1 year for equipment ,6 months for accessories .
■ Contact Us
E-mail:
Products: UHF Tetra 400MHz Repeater Fiber Optic Signal Amplifier
BDA widely used in trunking communication systems
Subject:
Message:
Quantity needed:
Verification:    
■ Solution&Application
  • *Model : KT-8M
    *Product Category : 8dBi Indoor Wall-mounting Antenna

  • *Model : TQWTD-12065-08/09V
    *Product Category : Base Panel Directional Antenna

  • *Model : UHF BDA Bi-directional amplifier
    *Product Category : VHF BDA Bi-directional amplifier

  • *Model : POI-1821
    *Product Category : 1800/2100MHz Band3+Band1 POI

Kingtone was established in 2006, located in Microwave Communication Base of the National Torch Plan in Quanzhou, China. It is a leading manufactor specializing in microwave communication equipment field and dedicated to R&D,manufacture,salses and services of microwave passive and active components, softwares of radio stations, communication monitoring and internetwork products.

Kingtone heavy invest to R&D, innovation, quality control system to win good products and good brand reputation. We have achieved seven software copyright certificates registered by the State Copyright Bureau and passed the ISO9001:2008 quality management system. Four Brands have been registered by the State Trademark Bureau and we have been recognized as "innovative and high technology enterprises " by Fujian Science and Technology Department in 2010. Our products are widely used in mobile communication, radio and television, public security, fire control, railways, electric power, mining and other fields; the main products are GSM repeater, CDMA repeater, CDMA450 repeater, IDEN repeater, TETRA repeater ,DCS repeater, PCS repeater, PHS repeater, TD-SCDMA repeater, WCDMA repeater, FDD-LTE repeater,TDD-LTE repeater,WiMAX repeater, MMDS repeater,MUDS repeater, digital TV repeater, VHF/UHF repeater for DMR/dPMR/TETRA/PDT system.

Kingtone insists on the spirit of “people-oriented, technology first, unity and strive, innovation and dedication” and the quality concept of “golden quality win the world” to continuously provide superior quality products and services to our customers.

We are sincerely willing to cooperate with you. let’s win the future together!